Five Steps for Cleaning a Pool Cartridge Filter

March 28, 2017 7:02 pm Published by Leave your thoughts

One of the major advantages of using a cartridge filter is the fact that it requires minimal maintenance. A sand filter needs to be frequently backwashed in order to function properly, while a cartridge filter only needs to be cleaned three or four times per year. Not only will cleaning the filter increase the efficiency of your unit, it can also extend its overall lifespan. Unfortunately, cleaning the cartridge filter tends to be quite a time-intensive process. The cleaning process is easy enough that even the most novice pool owner can successfully attempt it, but it does require quite a bit of time in order to clean it properly.

Luckily, there are a few different steps you can follow to clean the cartridge both effectively and efficiently:

  • Step one: Shut the system off before bleeding air from the filter slowly by carefully turning the air relief valve. Then, remove the clamp that keeps the filter held together. Consult your professional pool contractors in Mandeville, LA if you’re not sure how to remove the clamp from your specific filter model.
  • Step two: Next, carefully lift the top section away from the cartridge filter. You should now be able to see all of the different elements within the filter. Gently remove any part holding the cartridge in place prior to removing the cartridge elements. Check each individual piece for any signs of damage. It’s best to replace the entire filter cartridge if you notice any cracks in the plastic housing, as it can drastically reduce the effectiveness of the filter.
  • Step three: Once the cartridge has been removed, coat the entire surface with a high quality degreaser to remove any oils that may have accumulated since your last cleaning. Take special care to ensure the product is applied to the space between the pleats, as contaminants tend to build up in this area. Once the cleaning solution has worked its magic, it’s time for a rinse. You can use a garden hose to easily remove the product and the debris from the cartridge.
  • Step four: Go ahead and return all the different parts back to their proper places once you’re satisfied that they’re clean. This is the perfect time to check that each part is still in peak condition. Talk to your pool contractors in Mandeville, LA about replacing any dry rotted or cracked components.
  • Step five: Finish off the reassembly by securing the tank lid and closing the clamps before turning the system back on. Remember to open up the air relief valve at the top of the filter tank to release any lingering excess air. You’ll know it’s done when water begins to spray from the valve.

Keeping your pool in top condition requires regular care and maintenance, including cleaning the cartridge filter at least four times per year. By following these simple steps, you’ll know that your pool will be ready to go. Contact the trusted pool specialists at Tropical Pool Services & Renovations, LLC today for more information.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *